
The upcoming Insta360 drone appears to have a conventional camera rather than the 360-degree camera you might expect from the brand. Leaked images show a drone design with four guarded propellers, a display on top and smaller sensors that may help with tracking and obstacle avoidance. The camera specifications and the display’s purpose are still unconfirmed, but the images give you a first look at the front of the drone. Get up to speed on what TechAvid shows in the leaked images, as well as a patent that could point to a more compact design.
Insta360 Drone Leak Points to a Conventional Camera
TL;DR Key Takeaways :
- Leaked images show an upcoming Insta360 drone with a conventional camera rather than a 360-degree camera, though its specifications remain unconfirmed.
- The leaked photos show four propellers, each surrounded by a protective guard and integrated into a compact frame.
- Smaller optical sensors beside the camera are likely intended for visual tracking and obstacle avoidance.
- An Arashi Vision patent describes nesting, locking fuselage sections, but it has not been established whether the pictured prototype uses that mechanism.
- An Insta360-branded display sits on top of the drone, but its function is unknown.
This is the first look at the front of the drone, after earlier images showed its top and underside. The pictures have circulated online from different sources, and the front view is the one that answers the camera question: the pictured aircraft carries a single conventional camera, not a 360-degree one like DJI’s Avata 360.
A Square Camera Module Flanked by Sensors
The main camera sits in the center of a black, square module with rounded corners, with smaller optical sensors and an LED on either side. Those sensors are likely there for visual tracking and obstacle avoidance, and similar ones on the underside could help detect obstacles below. The camera’s specifications are not yet known.
Browse through more resources below from our in-depth content covering more areas on Insta360 drone leaks.
- Leaked Patents Show Insta360 May Launch a Sub-250g Drone
- Insta360 Leak Shows Enclosed Propellers to Rival the DJI Neo 3
Guarded Propellers, a Compact Frame and a Display
The photos show four propellers, each inside a protective guard that forms part of a compact frame, with lighter supports running through the cages. The motors and propellers suggest a pusher-style arrangement. The upper section is gray, while the underside and central hardware are mostly black.
On top is an Insta360-branded display. Whether it is a simple status panel or something more functional is unknown, but Insta360 appears to be exploring ways to move basic information and controls off the phone, which would let you check on the drone without repeatedly reaching for a smartphone.
A Patent Hints at a Nesting Fuselage
A Chinese utility patent from Arashi Vision, Insta360’s parent company, published on February 3, 2026, describes a fuselage whose sections nest together and lock into position, which could allow a more compact form if it reaches the final drone. Whether this prototype uses the mechanism has not been established, and the leaked photos show no obvious folding hinges.
Taken together, the leaks describe a small, guarded drone built around an ordinary forward-facing camera, which would be a departure for a brand known for 360-degree capture. The display is the detail to watch, because a screen that handles basic information and controls, if that is what it turns out to be, would mean far less reaching for a phone in flight.
Media Credit: TechAvid
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.