
If you play on a Steam Deck or Steam Machine, the new Valve SteamOS 3.10 Preview brings a long list of changes you can try before they reach the stable release. Valve’s release notes add HDMI 2.1 support for AMD graphics, smoother variable refresh rate behavior and HDR and brightness control for the ROG Xbox Ally X20, while Deck Ready has been testing the update on Steam hardware. Preview builds can bring bugs, but you can see what has changed, what you need for the display improvements and how to switch channels.
SteamOS 3.10 Preview: HDMI 2.1, VRR and Ally X20 Support
TL;DR Key Takeaways :
- SteamOS 3.10.1 is a Preview channel build that follows the 3.9 stable release and may contain bugs or stability issues.
- AMD graphics gain HDMI 2.1 support for VRR, FRL and ALLM, which Deck Ready reports brings 4K at 120 Hz to Steam Machine.
- Frame timing improves when the framerate limiter is used with VRR, alongside less flicker and smoother cursor movement.
- The ASUS ROG Xbox Ally X20 gains HDR and brightness adjustment in Game Mode.
- Version 3.10.1 fixes launch failures in the Forza Horizon series and an “invalid signal” error on certain displays.
SteamOS 3.10.1 is the current build on the Preview channel, where Valve tests features before they reach everyone. It follows the 3.9 stable release, and Valve describes it as an early build that may contain unexpected bugs or stability issues. SteamOS runs on Steam Deck and Steam Machine, and you can also install it on other PCs.
To try it, open Settings, then System, and change the System Update Channel to Preview.
HDMI 2.1 Arrives for AMD Graphics
The headline change is for AMD graphics, which gain HDMI 2.1 support for three features:
- VRR: variable refresh rate, which lets the display follow the game’s frame rate.
- FRL: Fixed Rate Link, the higher-bandwidth signal mode HDMI 2.1 uses.
- ALLM: Auto Low Latency Mode, which switches a TV to its low-lag game mode automatically.
Deck Ready reports that this is what brings 4K at 120 Hz to Steam Machine, whose HDMI 2.1 support was missing at launch because of a licensing issue. You could already play at 120 FPS, but with some latency. The same support should reach other SteamOS PCs with AMD graphics, such as one with a 9070 XT.
To use it you need a compatible TV, the correct HDMI port on that TV and an HDMI 2.1 cable. The cable supplied with a PS5 is suitable, while a first-generation Nintendo Switch cable is not.
Become an expert in SteamOS and Steam Machine with the help of our in-depth articles and helpful guides.
- DIY SteamOS PC Blasts Past Valve’s Steam Machine Speeds
- Upgrading Valve’s Steam Machine to 64GB RAM and 4TB Storage
- DIY Steam Machine Build : Skip the Mini PC, This Linux Steam Build Hits 1440p with Headroom
VRR Gets Smoother in Games and Menus
Variable refresh rate matches the display’s refresh rate to the game’s frame rate as it changes, so a brief drop from 60 FPS to 55 looks smoother, although it does not remove the dip itself. This build tidies up how SteamOS behaves with it switched on.
Frame timing is improved when you use the framerate limiter with VRR, and the screen flickers less while you move around the Steam interface or leave it idle. Cursor movement now matches the game’s frame rate above 30 FPS, instead of spiking the panel to its maximum refresh rate.
In Deck Ready’s testing the frame-timing change made only a small difference, although that was mainly with older games that had no problems to begin with.
Ally X20 Gains HDR and Brightness Control
Game Mode adds HDR and brightness adjustment for the ASUS ROG Xbox Ally X20. People installing SteamOS on the handheld have also run into controls and speakers that do not work, so it is still early days for SteamOS on this hardware.
Fixes for Forza, HDR, Charging and Bluetooth
Version 3.10.1 itself is a small follow-up that repairs two problems introduced by 3.10: launch failures in titles such as the Forza Horizon series, and certain displays showing an “invalid signal” error. The wider 3.10 release also fixes:
- Overexposure caused by scaling in certain HDR titles, such as Control.
- Flickering and stale frames in Game Mode in games such as UBOAT and The Fruit of Grisaia.
- The “Slow Charger” alert appearing when it should not.
- Bluetooth audio disconnecting when you switch between desktop and game modes.
NVIDIA, Desktop Mode and the Kernel Are Updated
NVIDIA graphics get general stability and performance improvements, support for mesh shaders on Turing and newer cards, and fixes for rendering corruption in Shadow of the Tomb Raider and The Surge 2.
Underneath, the Arch Linux base is updated, the kernel moves to Linux 7.3 and Desktop Mode goes from Plasma 6.7.3 to Plasma 6.8.2. Game Mode adds support for VK_EXT_present_timing, and Valve also lists many security and stability improvements, along with new timezone data for Cuba and for Canada’s Northwest Territories and Manitoba.
If you want the display improvements now, switch to the Preview channel, and check your TV, port and cable first if you are after 4K at 120 Hz on Steam Machine. Anyone who would rather avoid bugs can stay on the stable release, and Valve asks those who do hit a problem on Preview to report it on the SteamOS issue tracker.
Media Credit: Deck Ready
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.