If you are looking for a new project to keep you busy this weekend and have access to a 3D printer, you may be interested in this excellent PyPortal 3D printing case created by the team over at Adafruit. For those not familiar with PyPortal, it takes the form of an easy to use IoT device that allows you to create all the things for the Internet of Things in minutes rather than hours.
“Make custom touch screen interface GUIs, all open-source, and Python-powered using tinyJSON / APIs to get news, stock, weather, cat photos, and more – all over Wi-Fi with the latest technologies. Create little pocket universes of joy that connect to something good. Rotate it 90 degrees, it’s a web-connected conference badge.”If you are interested in building your very own Internet display check out the video below.
“Let’s 3D print a case for the PyPortal. Use the PowerBoost 1000C and a lipo battery to make it portable. The case houses all of the electronics and snap fits together. The enclosure features access to the microUSB port, micro SD card slot and the USB recharging port. It uses a mini panel mounted toggle switch to power the device on/off. There’s also a 1/4-20 hole for a standard tripod mount so you can mount it however you’d like.”
For more details on the project jump over to the official Adafruit project page by following the link below.
Source: Adafruit
Latest Geeky Gadgets Deals
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.