A new smartphone wireless audio interface has been created by Joël Antonin based in Berne, Switzerland called BAM! The wireless audio interface has been specifically designed for your smartphone and allows you to use the best microphones available with your smartphone to create a mobile audio recording rig. Watch the demonstration video below to learn more about BAM! And it’s features.
BAM! is presented as a slice of a mixing console Allowing users to adjustment of the gain in increments, VU-meter for visual level control and fader in the form of a knob, phantom power (+48V) as well as a 3.5mm jack connector to connect a headset to monitor what is being transmitted. BAM! has a range of 30 m and uses Bluetooth 3.0 technology for connectivity And is compatible with a wide variety of different iOS and Android applications such as MoviePro, FiLMiC Pro, Mavis, LU-Smart (LiveU), MoJoPro (Aviwest) and more.
Specifications of BAM! include :
– Input : XLR 3-pin female
– Impedance : 1kOhm
– Bluetooth : STD 3.0
– Frequency range : 50Hz – 7kHz
– Sampling frequency : 16kHz
– Range : 30m
– Autonomy : 4h (minimum)
– Dimensions : 14.5cm x 3cm x 4.5cm
“The development is basically finished. The design should not or only slightly evolve. The production of functional prototypes made it possible to validate the quality of the key components of this project. In addition, the production will be carried out in Switzerland at the service provider who made the prototypes.” to help the project come to life jump over to the Kickstarter crowdfunding campaign page by following the link below where pledges are available from £146 and worldwide deliveries expected to take place during September 2019.
Source: Kickstarter
Disclosure: Some of our articles include affiliate links. If you buy something through one of these links, Geeky Gadgets may earn an affiliate commission. Learn about our Disclosure Policy.
