If you are searching for electronic components for your latest Halloween project you may be interested in the Adafruit MONSTER M4SK which offers two 240×240 pixel IPS TFT displays, driven by a 120MHZ Cortex M4 processor.
“This unique design has the eyes at the same pupil-distance as a human (~63mm) but is designed so that the nose section can be broken apart with pliers/cutters and then wired together with a 9-pin JST SH cable up to 100mm long so the eyes can be re-positioned or freely attached.”
Specifications of the Adafruit MONSTER M4SK :
– ATSAMD51G19 Cortex M4 microcontroller running at 120MHz with 512KB Flash, 192KB RAM
– 8 MB QSPI flash for storing graphics and sound effects
– Two 240×240 IPS TFT displays each on their own SPI bus
– Beautiful silkscreen with a boop-able nose that is a capacitive touch pad
– LiPoly battery charge circuit for portable use
– Stereo headphone jack out, for sound effects via an amplifier
– Mono speaker driver for smaller 8 ohm 1W speakers
– One 4 pin STEMMA JST connector for I2C connection (also Grove compatible)
– Two 3 pin STEMMA JST connectors with digital/analog/PWM for servos, sensors, etc
– One 4 pin JST SH port for connecting an optional PDM microphone
– Backlight controls
– Three tactile buttons
– Light sensor
– On/Off Switch and reset button
Jump over to the official Adafruit online store where the Adafruit MONSTER M4SK is now available to purchase priced at $44.95
Source: Adafruit
